Greenfield KS2 Alloy Silver Bicycle Kickstand

Reviews of Greenfield KS2 Alloy Silver Bicycle Kickstand

1.) Kick! Stretch! and...KICK!
Reviewed by: J. Nofziger Columbus, OH
Rating:

This kickstand does what every kickstand should. It holds my sweet bike up. It has never failed me yet, in fact, as I type, it is proudly doing it's best right now, hold up my bike in the garage. I'll wager that when you are reading this review in the future (right now that is) this kick stand is accurately performing its function. I recommend this little guy as a proud addition to any bike. It will not let you (or your bike!) down.

2.) Solid, basic kickstand.
Reviewed by: M. Cmar Pittsburgh, PA USA
Rating:

I purchased this Greenfield kickstand at a local sporting goods store to replace the kickstand that came with my hybrid bicycle. This kickstand is, in a word, solid. The spring is very strong, and the kickstand length is a perfect match to my original stand. And it's made in the USA, which I found to be a nice bonus.

The only criticism I have for this Greenfield kickstand is that the diameter of the stand is somewhat narrow. This makes the bike easy to tip over if you are not on solid pavement. I suggest that you add the Greenfield rubber foot (available on Amazon: Greenfield Kickstand Rubber Foot) to this kickstand. The foot makes your bike much more stable on both solid and unstable (sand, dirt) ground.

3.) The worlds best kickstand
Reviewed by: KK Kuwait
Rating:

This is the world best kickstand and comes in black and alloy. It is light, easy to fit and has a great spring. I now have one on all three of my mountain bikes

4.) THE BEST
Reviewed by: JOBLESSNUSA
Rating:

THESE KICK STANDS ARE MADE IN GREENFIELD , NY. THEY ARE THE BEST YOU CAN BUY. THEY ARE CHEAP , WELL MADE AND HAVE A GOOD DESIGN. THEY WILL FIT ALMOST ANY BIKE BUT THEY WILL MAR YOUR PAINT. THIS IS NOT A PROBLEM ON AN OLD BEACH CRUISER USED FOR BEER RUNS ! WITH A LITTLE CARE ( CLEAN AND LUBE LIGHTLY ) IT SHOULD OUTLAST YOU...

5.) Made in USA
Reviewed by: Nancy Drew Livonia, MI
Rating:

Good quality, Made in the USA Easy to install. Does the job

6.) A tough bicycle kickstand for not much $$$
Reviewed by: Smartsurfer Lansdale, PA
Rating:

A great replacement for a broken Schwinn Bike kickstand. Very easy to install. Comes with a short and long screw and bracket (if needed) depending on the install. This stand is slightly longer than the original (good in this instance), but could be cut down to size if needed.

7.) Good product
Reviewed by: Metin54 NJ-USA
Rating:

It is the right size for the larger bicycles. Easy to install. Used only for a few months so far, but seems and feels sturdy.

8.) Simple and reliable
Reviewed by: Shagui
Rating:

This kickstand is cheap, simple, light easy to install, reliable, low profile, excelent quallity USA made, very stable....
what else you want
This works very very well with a MTB loaded bike (Panniers and Handel bar bag)
It have some measurements in order to cut it for the desired lenght, but be careful doing it , if you cut it more than what you need you can't go back and will spoil it
And mine came with the Greenfield KSRF Kickstand Rubber Foot!!!!

9.) GOOD PRODUCT Greenfield Kickstand KS2 305mm
Reviewed by: Richard Brant Shadow Hills, California USA
Rating:

I have used Greenfield Kickstands, both this model and others, finding them to be a good product.

10.) Greenfield Kickstand
Reviewed by: Kay Hellen LB, CA USA
Rating:

The kickstand was easy to find on the website. The checkout process was a breeze. The kickstand arrived at our house right on time and was exactly what we wanted. An enjoyable shopping experience.

11.) Nice kickstand, but a little too big for my Bike.
Reviewed by: Wino Georgia
Rating:

I got the smaller 285mm kickstand, hoping it wouldn't be too small for my Motobecane Elite 19" Hybrid Bicycle, but it's actually a little longer than I would have liked. The bike is at about an 85 degree angle to the ground with the kickstand down. I couldn't use the top plate that came with the kickstand, because there was no room for it on my bike, so I just used the bolt to connect it to my frame, which has a hole that matches perfect to the bolt that came with the kickstand. My bike, when at a 90 degree angle to the ground has 11-1/8" from where you mount the kickstand to the ground. I also ordered the little rubber foot for this kickstand, but since the kickstand was so long I couldn't use it. It seems like a good kickstand though, with a good spring, and hopefully it will last a long time. I'm pleased with it, just wish they had one a little shorter.

P.S. Just noticed that the kickstand has marks going up the backside starting at 280mm and going up the stand in 5mm decrements, so you can cut it with a hacksaw, if you want it shorter.

12.) Not bad but could be better.
Reviewed by: C. YANCEY MI
Rating:

I bought the 285mm version for a 26" bike with a small sized frame and found it to be of good quality but a bit too long. The bike stands at about a 89 degree angle so if you look at it cross eyed it will fall over so you have to put it next to a wall just in case. I imagine a larger bike frame or 700c wheels might not have the same problems. At some point in time I plan on cutting it down a half inch or so to get a good tilt but till then it'll do.

13.) Excellent, but not if you need to cut
Reviewed by: Mr. T.
Rating:

This kickstand is wonderful and easy to install. Fortunately, I didn't need to trip the length of the kickstand for my bike. If I had needed to shorten it I'm not sure how I would have done it.

14.) Does not fit all bikes
Reviewed by: beema
Rating:

As far as the kickstand itself goes, it's solid and does the job.
I just wanted to make a warning to those considering getting it: you might want to check it out in a bike shop first and see if it works with your bike.
I got one, and it doesn't fit properly on my Cannondale Quick.
When I try to use the bracket, the screw provided is not long enough to fully screw into the bottom stand.
Also the kickstand will cut into the gear cables that run along the frame of the bike in that area, which is something I think you would want to avoid. If you use the bracket, it cuts into the cable for the front derailer. The main portion of the kickstand cuts into the cable for the rear derailer.

15.) This kickstand was too weak to continue using.
Reviewed by: Derek Hutchinson Yuba City, CA United States
Rating:

This kickstand came with my hybrid bike. Keeping the bike in my garage during the summer, temperatures in the garage never got above 105 degrees F. The kickstand was bent by the weight of the bike until it protruded so far out from the side that it prevented me from peddling.

Features of Greenfield KS2 Alloy Silver Bicycle Kickstand

The world standard for quality. Aluminum alloy. Two sizes and colors to choose from. Made in the U.S.A. Bottom Bracket Mount. 285 mm, fits most size frames. 305 mm, 22" frames or higher.

1.) Designed to fit most lightweight, midweight and cr;
2.) Fits frames with welded-on mounting plates;
3.) Made in U.S.A.;
4.) Bottom Bracket Mount;
5.) 285 mm, fits most size frames. 305 mm, 22 frames o;